How to Add a Bead to a Gourd Lamp

SKU: vid5

Availability: In Stock


Quick Overview

Click on Description Tab to the left for drill bit sizes


Note:  This is my experience working with gourd light beads. 

First, First, First - save the piece of gourd you cut out for the electrical.    

I found working with the beads and different types of gourd, that there is some variability in what size to make the hole for the bead.     One would think that you would use the same size drill bit for 4mm bead, but I found that the type of gourd and brand of drill bit creates some variability.    

Regarding the gourd, some gourds have a very hard shell with little meat such as a cannon ball, apple gourd, or basketball, thus not having as much “give” when pushing in the bead.  If you need to push so hard on it, chances are you will crack the gourd.  It is at this point, you should go to the next size up drill bit, or work the hole as described below.         

Using the piece of gourd you cut out for your electrical - DO TEST HOLES!

Bead Size

Start with This size first

I found some gourds  needed to use this size










If it is a close fit and/or going up the next size drill bit, the hole is too large and the bead falls through.  Use the smaller drill bit size and by hand (remove drill bit from drill) and slide the drill bit through the hole 1 or two times.  


Customer Reviews

Review "How to Add a Bead to a Gourd Lamp "

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.